AVer EMC1000, Руководство пользователя, Страница: 12 / 33

10
CONFIGURE EMC1000 NETWORK
1. Go to system setting,
network setting, current
settings and status appear.
Click on to start setup.
2. After you finish the editting,
write down EMC1000 new
network settings, click
to apply the changes or
to discard the changes.
3. EMC1000 will reboot.
4. If you set the network to
DHCP, IP address may
change
(usually not
recommended) and only
Hostname is editable.
Hostname and DNS are very
important
for firmware
upgrade, SIP call with
domain name and
NAT/firewall traversal.
Make sure you remove the cross cable and connect EMC1000 to production network when EMC1000
reboots. Change your PC network setting back to the original setting (e.g. DHCP). Enter EMC1000
new IP address in internet browser URL. Log in using admin and admin.