73
Missing Object
Select a certain object on the screen for the camera system to detect; System gives alarm
when the object disappears.
1. Select the
Missing Object
from the drop-down list.
2. A red frame will show up on the screen. Click and drag the red frame to the object position
and click the frame to adjust the size of frame.
3.
Detection Duration:
Set the lasting time for camera system to detect the object.
4.
Alert Duration:
Set the alarm lasting time after alarm has been triggered.
5.
Sensitivity:
Set the degree of response of detection.
6.
Display on OSD:
Mark to enable the missing object frame to display on screen when
missing object has triggered
.
Содержание E1000 Series
Страница 1: ...E1000 series 8CH Pure NVR E1008 8CH Hybrid DVR E1008H User Manual V2 3 1 1 ...
Страница 55: ...46 2 6 2 4 Setup the Network Port Assign a Network Port for remote accessing connection ...
Страница 62: ...53 2 8 Camera Setting To connect and configure the analog and IP camera Click Setup tab Camera Setting ...
Страница 125: ...116 7 To delete the iPOS mark the iPOS and click Delete button 8 To view the iPOS event log refer to Chapter 2 17 3 ...
