13
VGA-C5 Series Multi-Port Model: Installation and Operation
a.
Site Selection:
For first time installation, place Transmitter near the PC or AV devices; you
can use rack mounting kit to fix the system box.
Rack Mounting Kit for Multi-Port Units
b.
Connecting Monitor and Speaker:
Plug power adapter to the Transmitter and connect
monitor and speaker to “VGA/AUDIO OUT” port. The POWER LED will turn ON green to
indicate the POWER ON status and “ACTIVE” LEDs should turn OFF to indicate the
unconnected status. Then prepare VGA and Audio cables to connect the signal from your AV
device to the “VGA/AUDIO IN” port of the Transmitter box.
c.
Local Function Test:
Power ON your AV device, the “ACTIVE” LEDs of the Transmitter will
turn ON orange to indicate the video activation. You are now ready to do AV broadcasting.
Installation Diagram of System Transmitter
d.
Receiver Installation:
Follow “Receiver VGA-C5-R Installation” steps to install VGA-C5-R
Receiver.
The maximum extended length of this section should not exceed 300 meters (1000ft).
