12
d.
Connect UTP Cable:
Plug two ends of UTP cable to Transmitter and Receiver’s RJ45 UTP link
port. The Receiver’s connected monitor and speaker should work now. You can adjust the
FOCUS and GAIN control of receiver to have the best VGA display.
Installation Diagram of Receiver VGA-C5-R
e.
Function Test:
After above installation, you will be able to broadcast the AV signal to
Receiver’s connected monitor and speaker.
General Troubleshooting
Problem
Possible Solution
Screen Defects Appear
Check that VGA resolution and frequency is not over the
limit of monitor display.
Check your current resolution, refresh rate and color depth
settings in the
Settings
and Monitor tabs in your
Display
Properties dialog.
Off-Center Screen Image, Odd
Colors or No Picture
Try adjusting the brightness, sharpness, contrast, and color
balance controls of your monitor.
Try adjusting the centering and positioning controls of your
monitor to position the picture on the screen.
No Image
Ensure that the monitor cable is securely fastened to the
VGA and Monitor port.
Try to connect monitor and speaker directly to a PC to ensure
basic functionality of these devices.
