www.avenview.com|8
1.8
IR Control Patch
IR Blaster Cable
IR Receiver Cable
IR Sockets
SW-HDM3D-C6-8x8E
All IR Out:
The default location for IR blaster to transmit all IR command signals received from any of the
four remote receivers to all of the HDMI sources.
IR BLASTER 1-4:
IR blaster connected here can only transmit IR command signals from the remote
receivers that are setting at respective input channel from 1 to 4.
System IR:
Receives IR commands from remote control
HDM3D-C6SW-R
IR BLASTER:
IR control on individual display device
IR RECEIVER:
IR receiver connected here can receive all IR command signals from the IR remote controls of
SW-HDM3D-C6-8x8E and all other HDMI source devices.
IR Blaster
IR Receiver
Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders. Please check
carefully before plugging in the IR extender to the respective IR sockets. Warranty will not cover the
damage.
