2.4.1
FRONT PANEL (Sender/Encoder, HDM-C6MWIP-S-V3)
2.4.2
REAR PANEL (Sender/Encoder, HDM-C6MWIP-S-V3)
1.
Power Jack: DC 12V
1A
2.
Stereo Audio OUT: Connects to an audio output
device such as an amplifier for audio de-embedding.
3.
HDMI IN: Connect to HDMI/DVI Source.
4.
RS 232: RS-232 Data pass-through port for
receiving /sending commands to RS 232 devices.
5.
CAT5/6: Used for transporting video/audio streams to
Decoder RX units connected.
6.
Reset LED,
7.
Reset Key:
Reset LED is on for about 1 second and then off,
release this key, encoder reboots and restores to
its factory default.
1.
Power LED: Indicates if the unit is powered OFF or ON by a RED LED
2.
Status LED: Steady Blue Light ON indicates unit is Encoder detects valid signal input. LED blinking waiting on source
1
2
1
2
3
4
5
6
7
PANEL DESCRIPTION