To setup Avenview HDM-C6MWIP-SET-V3 please follow these steps for connecting to a device:
1.
Turn off all devices including monitors / TV.
2.
Connect an HDMI source (such as a Blu-Ray Disc player or
P
C) to the Encoder HDM-C6MWIP-S-V3.
3.
Connect CAT5e/6 from Encoder to Decoder at the CAT5e/6 port.
4.
Connect an HDMI out from HDM-C6MWIP-R-V3 decoder to a Display/Monitor
.
5.
Connect Audio out to Speakers or Amplifier.
6.
Ensure all cable connections are secure and not loose.
7.
P
lug in 12V DC power (supplied) and connect the HDM-C6MWIP-S-V3 and HDM-C6MWIP-R-V3 to power jack respectively.
8.
P
ower on HDMI Source.
9.
P
ower on the HDMI display.
NOTE:
For network setup please see the Network switch configuration guide and Network Connection guide to achieve
best results.
3.1.1 IP Matrix Switch Guide
TX and RX Guide
Networking Switch Guide
Dis
tribution
Status
Total
Quantity
Network
Topology
Recommended Switches
Centralized
Less than or
equal to 20
TX/RX
Single Switch
Networking
Cisco SG 300 24-port 1000 Mbps Ethernet
Switch HUAWEI 24-port 1000 Mbps Ethernet
Switch
Less than or
equal to 40
TX/RX
Cisco SG300 /500 48-port 1000 Mbps Ethernet
Switch
HUAWEI 48-port 1000 Mbps Ethernet Switch
More than
40 TX/RX
Cascading
Switch
Networking
Cisco switch SG Series or Catalyst:
Core switches uses 1000 Mbps Ethernet switch
Extended switches use 1000 Mbps Ethernet
switches
Distributed
No
requirement
INSTALLATION (HDM-C6MWIP-SET-V3)
APPLICATION