7
2.4.
3
FRONT PANEL (Receiver/Decoder, HDM-C6MWIP-R)
1.
Power LED: Indicates if the unit is powered OFF or ON by a RED LED.
2.
Status LED: Steady Blue Light ON indicates unit is communicating properly. LED blinking waiting on Encoder.
2.4.
4
FRONT PANEL (Receiver/Decoder, HDM-C6MWIP-R)
3
.
Ground Screw: Ground connection prevent device
from voltage damage.
4
.
Power: 12V 1A DC Power Jack.
5
.
Used for accepting video/audio streams from the
Encoder TX units connected.
6
.
HDMI OUT: Connect to HDMI Display.
7
.
Stereo Audio OUT: Connects to an audio output
device such as an amplifier for audio de-embedding.
8
.
RS 232 : RS-232 Data pass-through port for receiving
/sending commands to RS 232 devices.
1
2
3
4
5
6
7
8
www.avenview.com
