www.avenview.com
Page 3
2.
INTRODuCTION
The Avenview HBT-C6Ip-SET HDMI Extender over Single CAT5/CAT6 embedded with HDBaseT lite Technology which
supports:
Video Signals: 4k2k@30, 3D, Deep Color, and full HD 1080p 48-bit color depth.
Audio Signals: lossless Multi-channel audio formats (DTS-HD Master Audio, Dolby TrueHD.
Data Signals: Bi-Directional IR signals 20 kHz to 60 kHz over CAT5/6 from third party IR Senders.
This device was designed extend your video/audio sources that are compliant with TMDS and HDCp over single twisted pair
CAT5/6 to 60m -198ft (1080p 48-bit) and 40m-130ft (4k@30) to your HDMI or DVI display monitors.
The HBT-C6IR-SET includes (2) two units: Transmitting unit (Tx) HBT-C6IR-S and Receiving unit (Rx) HBT-C6IR-R. The Tx
is designed to capture the input HDMI / DVI video/audio/data signals with IR control packets then transmits both signals over
Single CAT5/6 cable. The Rx is responsible for equalizing the transmitted HDMI signal and reconstructing the IR signals to the
appropriate device for control via its 10G transmission.
- HDBaseT-lite technology
- HDMI 4k2k@30, full HD1080p, Deep Color & 3D
- Supports default resolutions 480p,720p1080p and HDCp & EDID Bypass
- Extends up to 60m (198ft) (1080p)
- Extends up to 40m (130ft) (4k@30)
- lossless Multi-channel audio formats (DTS-HD Master Audio, Dolby TrueHD, Dolby True HD
- EC support to control supported devices for common user controls via HDMI
- Auto Equalization built –in to ensure the high quality video/audio is transmitted
- Support Bi-Directional IR signals 20 kHz to 60 kHz
- Supports CEC (Consumer Electronic Control)
- Wall mounting housing design for easy and robust installation
NOTE: The QuAlITy and TRANSMISSION of the video signals depends
on the characteristics and quality of the uTp cables. Higher resolutions
and longer transmission distances require low skew cables (<25ns/100m)
for best performance.
unshielded CAT6 with metal RJ-45 connectors is recommended.
