Avenview FO-HDM2-T4K-R, Руководство по эксплуатации продукта

Страница: 6 / 24

Features
- Support HDMI 2.0(a/b), HDCP 2.2 (& backward compatible).
- 300m (1000ft) on full 4K (Multi-mode OM3).
- 300m (1000ft) on full 4K (Multi-mode OM2 selective cables)
- High Bandwidth support over 18Gbps.
- Resolution up to 4K60 4:4:4 DCI/UHD(4096x2160/3840x2160).
- Support HDR, HDR10+ and HLG (HDR 10 & 12 Bit).
- Dolby Vision, 3D Support.
- Down-scaling for mixed systems 4K to 1080P.
- EDID Management and EDID emulate.
- Built-In 4K & HD Test Patterns for troubleshooting Tx and Rx..
- Audio Extraction-Toslink Multichannel, ARC (Toslink or HDMI).
- Supports uncompressed PCM 2- Ch., LPCM 5.1 & 7.1, Dolby.
- Digital, DTS, Dolby TrueHD, DTS HD-Master, Atmos(On HDMI).
- Bi Directional IR Passthrough, RS-232, CEC Pass Through.
- Single LC Connector Type.
- Removable/changeable SFP for even longer distances.
2. INTRODUCTION
Avenview's FO-HDM2-T4K-SET HDMI 4K Fiber optic Extender set over LC SFP Port has been designed to extend 4K@60Hz
18GBPS Content over 300 Meters using Multimode fiber and up to 2KM using Single Mode Fiber. This unit includes two (2) units:
Sender unit (TX) FO-HDM2-T4K-S and Receiver unit (RX) FO-HDM2-T4K-R.
The FO-HDM2-T4K-SET supports 4K 18 Gbps content from source to display. Video resolution supported is 4K@60 Hz
(4096x2160), 4k2k@60 (UHD 3840x2160) , 3D and full HD 1080p@60 Hz. The slim box type design can be easily installed in any
environment, behind the monitor and rack mounted on a rack shelf; this compact design gives the installer and user a complete
solution with the new trends in rack-mounted 4K sources streaming, network connected devices and new demand for Smart TV, ultra
HD monitors,, and content.
The FO-HDM2-T4K-SET finds its way into market sectors such as Medical, Education, command & control environments and any long
distance extension application.
3
Rev.00 03/2018
www.avenview.com