Avenview FO-HDM-IP4K-SET, Руководство пользователя

Страница: 6 / 16

www.avenview.com
Page 3
2. INTRODuCTION
FO-HDM-IP4K -SET, HDMI extender set is designed to provide high quality video signal transmission over fiber optic cable or an
existing fiber network . Avenview's FO-HDM-IP4K-SET delivers an amazing pixel to pixel transmission of 4K @30 or 1080p HDMI
signal up to 20 kilometers. With this extender users overcome the length restrictions o f standard HDMI cables or UTP Extenders. This
unit can control your IR device from the monitors side with its supplied IR technology built in.
Bonus feature: The FiberTransmitter is also compatible with the HDM-C6IPX-R CAT5/6 Receiver, this simply means user can
migrate from a Fiber network to to copper network by adding the comptible RX device.
The Sender a nd R eceiver units can extend 20000 meters (20 k m) over a Fiber Optic cable p oint to point ;
The Sender can be connected to a Fiber network switch to establish a n Ip address therefore sending 1080p /4K video signals to
multiple Receivers connected to the Fiber network switch and the HDMI displays ;
Multiple Senders can be connected to a Managed Fiber switch with vlAN/IGMp support therefore sending 1080p /4K video
signals to Receivers connected to the network switch to show different sources on multiple displays ;*
•
Extends HDMI signal up to 20 km over fiber optic ;
• HDCp compliant;
• Support ed resolutions: 480i@60Hz,480p@60Hz,576i@50Hz,576p@50Hz,720p@50/60Hz, 1080i@50/60Hz,1080p@50/60Hz
4K@25/30Hz
• Support s point to point transmission function which can be expanded to the multi-point to point transmission
function.
* Requires a managed Gigabit switch with vlAN/IGMp support to have a soultion with multiple sources (Transmitters). Standard
Gigabit switch can only support one transmitter.
- The managed switch must support port based IEEE 802.1Q VLAN, IGMP, and to allow duplicate IP addresses across the VLAN
domains .
- Each VLAN acts as independent HDMI over IP Channel on the network.
• Number of Senders and Receivers that can be used is dependent on bandwidth of the network switch.
•
S ingle mode fiber optic transmission.
•
•
•
•
•
•
•
•
Built-in electromagnetic interference prevention in environment for long distance transmission.
Low signal loss, wide frequency band and strong anti-interference features;
High-end aluminum alloy enclosure design.
Wall-mountable design for convenient installation .
S upport IR pass back for easy control.
FEATURES:
FIBER Network Switch with copper ports
COPPER Network Switch with Fiber ports