background image

Safety instructions

AVENTICS

 | Joystick Type 531 | R417003072–BDL–001–AA

9

Eng

lish

by authorized personnel or by instructed persons supervised by 
authorized personnel.
An authorized person is someone who due to his/her expert 
training, knowledge and experience including his/her 
knowledge of the relevant regulations can assess the assigned 
tasks, recognize possible dangers and take appropriate safety 
measures. Authorized personnel must comply with the 
applicable specialist regulations.

2.5

General safety instructions

W

Observe the valid regulations pertaining to accident 
prevention and environmental protection.

W

Observe the safety instructions and guidelines of the 
country in which the product is used.

W

Only use AVENTICS products in technically perfect condition.

W

Check the product for obvious defects as for example cracks 
in the housing or missing screws, caps or sealings. 

W

You must not modify or convert the Joystick Type 531.

W

Persons who install, operate, dismantle or maintain 
AVENTICS products must not be under the influence of 
alcohol, other drugs or medications which affect the 
responsiveness.

W

Incorrect assembly, unintended use or inappropriate 
handling will invalidate the warranty. 

W

Only use original accessories and spare parts.

W

Under no circumstances the product may be subjected to 
mechanical load. Never use the product as a handle or step. 
Do not place objects on the product.

Содержание Marex 3D 531





























Отзывы: