G3 Series Wireless ARM Quick Start Manual
8
TDG3ARMQS1-1EN 03/21
Subject to change without notice
www.Emerson.com
Open an internet browser and connect to the G3 Wireless ARM webserver by typing the IP address.
(default IP address HTTP:// 192.168.4.1).
“View Only” and “Configuration & Parameter changes” buttons are displayed.
-View Only – connects to the G3 Webserver with read only access.
-Configuration & Parameter changes – connects to the G3 Webserver with write access.
Select “Configuration & Parameter changes” to open the password protected Configuration & Parameter Webpages with Read
and Write Access.
Configuration & Parameter changes are password protected.
NOTE!
