8
5.1.2
Cold lamination
Attention:
If you have just finished using the laminator for hot laminating, you must let
the laminator cool down. It takes about 30 minutes to cool down sufficiently.
1) Turn the function switch to the right in the COLD position.
Note:
Only use cold lamination foil for cold laminating.
2) Remove the protective foil from the lamination foil.
3) Insert the document to be laminated in the lamination foil so that there is a margin of
approx. 3 - 5 mm to the edge of the foil on all sides.
4)
Guide the laminating foil containing the document to be laminated in the laminator infeed
with the closed side first. The laminating process occurs automatically.
Note:
To prevent the lamination foil from creasing, never feed the open side of the
lamination foil first in the laminator infeed.