9
5.1.3
Clearing jammed lamination foil
The device is equipped with an ABS switch (anti-blocking sliding switch) to clear foil
jams quickly.
Proceed as follows if the lamination foil jams:
1. Switch the device off: Set the On/Off switch to OFF.
2. Slide the ABS switch fully to the left.
3. Hold the laminator firmly and pull the lamination foil together with the document to
be laminated out of the laminator's infeed.
4. Slide the ABS switch fully to the right.
5. Clean the transport rollers of any deposits and residual adhesive by inserting a
folded piece of paper in the laminator infeed, refer to Chapter "Cleaning the transport
rollers".
Note:
If foil jams occur repeatedly or jammed foil cannot be removed from the
laminator, please contact the sales representative place where you purchased the device
(refer to Guarantee).
