Avedro KXL System, Руководство оператора

Страница: 39 / 46

Chapter 4: Maintenance/Service
KXL System Operator’s Manual,
Rev G
4-3
o
If the indicator is orange wait until it turns yellow or green and try turning the
system on, if it still does not turn on or the indicator does go yellow or green
within 8 hours contact your local Avedro service representative.
4.7 Directions for Sterilization or Disinfection
No components of the KXL System are designed to be sterilized by the operator. External
cleaning and disinfection ONLY is recommended. For disinfection purposes, use only
isopropyl alcohol spray or preparations. Use small amounts of liquid and soft fiber-free
wipes.
4.8 Cleaning the System
Use a soft damp cloth to clean the system.
The exterior of the KXL System can be cleaned using a lint-free cloth dampened with
dilute bleach, soapy water, or isopropyl alcohol.
A 70% alcohol or 10% chlorine bleach solution can also be used if necessary.
DO NOT submerse the system in liquid or pour liquid onto the system.
CAUTION: Remove the power supply cord from the main outlet and turn off the power switch
prior to any cleaning procedure.
CAUTION: Aggressive cleaning agents, especially those containing abrasives or aggressive solvents
can damage component surfaces.
The glass window of the beam aperture must not under any circumstances be in contact
with any of the aforementioned substances.
While cleaning the surfaces of the device, ensure that cleaning fluids do not seep inside
the device, as this leakage can damage the device.
4.9 Cleaning the Aperture
Check the beam aperture routinely prior to treatment.
Use special camera lens wipes or compressed air to remove dust and particles from the
glass surface of the aperture.
4.10 Articulating Arm Adjustment
If the articulating arm does not hold the Optical Head in a fix vertical position contact your
local Avedro service representative.