page 5 User guide MX-8
14. Volume/Value knob: Rotary encoder with integrated pushbutton. This knob is
used, among others, to set the overall volume or set other values.
15. Preset/Parameter knob: Rotary encoder with integrated pushbutton. This knob
is used, among others, to switch from one preset to another.
16 17 18
27
19 20 21 22 23 24 25 26
Rear panel of the MX-8
16. Power connector: Connector for power cord to a 230 V / 50 Hz AC voltage
source.
17. Fuse: 315 mA
18. Main on/off switch
19. Output: Output connectors (to power amplifiers, etc.)
20. Direct OUT: Direct output without any signal processing. This output can be
used for capturing and transmitting the ambiance of e.g. a mass to external
rooms.
21. Level Direct OUT: Controls the output level of the direct output
22. Link in: Permits multiple mixers to be linked, creating additional inputs.
23. Link out: Output when linking multiple mixers
24. Tape-recording: Phono connectors for tape-recording
25. Tape rendiction: Phono connectors for music rendition via tape
26. CD rendition: Phono connectors for music rendition via CD
27. Microphone/line inputs
3 Basic operation of the MX-8
3.1 Programmable settings („presets“)
The MX-8 combines numerous integrated functions with very simple operation.
Even in acoustically difficult environments, best results are achieved. So-called
„presets“ can easily be programmed. No less than 20 of these preset slots
