15
changes?“) by pressing the PRE/PAR ("yes") you confirm the storage (
"Saving.... do not
interrupt"); your changes are rejected by pressing the VOL/VAL ("no").
Section 3
5
Modification of adjustments while switched off protection
Please, peruse absolutely these instructions exactly, before you carry out changes in
the settings!
Changes of the settings can be made only, if the "VOL/Preset - Protection" is switched
off.
5.1
Switch on and off protection
Switch off the DMX 84 in case of that it is switched on.
Hold PRE/PAR compressed and at the same time switch on the DMX 84.
After approx. 3 sec the announcement appears on the display
Next to SAVE the arrow (
) appears. By turning of PRE/PAR you can move it to the
designated menue.
(
registers that changes can be made here)
For the following setting you move the arrow to "CONFIG". By pressing the PRE/PAR you
reach in the Config menu, and on the display appears the Preset in which the DMX 84 was
started currently.
Turn now PRE/PAR until the following adjustment appears on the Display
By turning of VOL/VAL you switch the Protection off or on.
Press now VOL/VAL and confirm the protection of the setting by pressing PRE/PAR.
By renewed pressure of VOL/VAL you leave the menu, and on the display appears the
information with which Preset was started.
„VOL/Preset-Protection”
(on or off)
SAVE
PRESET
CONFIG
UTILITY