13
-
Release
Gate-Thres (on/off)
After generating a preset give a name to the preset and store it at your erected memory
location (see as well chapter “storing a preset”)
In this way further presets can be generated and stored.
So there is the chance to try a lot of different adjustments in the corresponding
accommodations.
A stored preset can be selected by clicking the “Prst” button. The following picture
appears:
Click to the file (
) behind the column “Preset directory”. Now choose the storing position
and click the button “Verzeichnis wählen”
With „Load Preset“ the designated preset can be choosen (1 – 20):
-
By using the control dial
-
Or by entering with the keyboard (set cursor into numbers)
-
or by using the arrow-buttons up and down (set cursor into numbers) and pressing
the button „Load“. The name of the preset appears in the column “Preset name”
and on the display by using the button “Prst”.
To carry over a preset to the DMX 84 and to store it there choose the preset number and
click at „DMX Preset“ to the button “Send”.
You can follow the data carry over on the display at the „send parameter“. Press “Save”
when the data transfer has finished. Now your presets are available on the DMX 84.