17
INT
:
apartment internal code.
Set a number from 0 to 3, according to the following rules:
If in the apartment there is only one station, the internal code must be set to 0.
In apartments, up to 4 apartment stations in parallel with the same user code and different internal
codes can be connected.
The internal code identi
fi
es each station of the same user. This means that intercom calls can be
addressed to the single internal code in the same apartment.
In case of intercom calls to different apartments, in case of calls coming from door units and in case of
fl
oor call, all the user apartment stations always ring. Consider also the following information:
after receiving a call, the internal code 0 rings immediately; the internal codes 1, 2 and 3 ring in
sequence.
If the call comes from a video call station, the internal code 0 turns the monitor on.
However, the other apartment stations of the same user can press the button
to turn their video
door phone, turning off the other (‘video transfer’ function).
2 FEATURES
2.1 RECEIVING A CALL
When a video door phone call is received from a door unit, the video door phone emits the call ring,
with the ring tone selected by the user and the display automatically turns on, showing the image
coming from the door unit.
If in the apartment there are several apartment stations in parallel, the stations ring in sequence. The
user internal code 0 also performs the video door phone power-on, if the call comes from a video
door phone call station. In this case, during the off-hook waiting time (60s from the call), the other
internal codes can turn their video door phone on by pressing the auto-on button
(‘video transfer’
function), until one of the video door phones of the called user answers.
If the image is already displayed, press the button
to cyclically display images coming from other
control cameras of the caller station only.
After picking the handset up, the image coming from the main camera will only be displayed in the
apartment stations which has answered.
Therefore the camera image will be displayed on one apartment station at a time.
2.2 ANSWERING THE CALL
By pressing the button , the user establishes a communication with the caller (the button pressed
starts blinking). By pressing again the button, the communication is closed and the display turns off.
2.3 DOOR LOCK RELEASE DURING A CALL AND OPEN DOOR INDICATION
After a call is received from a door unit or during the communication with a door unit, the pedestrian or
driveway gate can be opened by pressing the buttons
and
respectively.
If the call modules are provided with open door sensor (and the absence service is not active), the led
can indicate if the door is really open or not: the led lights up steady if the open door is the main one,
and blinks if the open door is the secondary one.
2.4 RINGER LOUDSPEAKER MUTE
This function allows to disabled the call ringer. To activate this function, press the button
. When
the function is activated, the led MUTE
turns on and when a call is received, the device will not
ring.
•
•
•
•
LBT AVE.indd Sez117
LBT AVE.indd Sez117
28-09-2010 16:46:18
28-09-2010 16:46:18
