- 39 -
G
Function 6: Activation of the operating cycle related to CHANNEL 1 for battery voltages lower
than THRESHOLD 1.
By selecting this function, as shown below, as soon as the lithium battery voltage drops
below the value of THRESHOLD 1, the operating cycle related to Channel 1 starts automati-
cally.
Should this function be not activated (as per the factory programming), as soon as the bat-
tery voltage drops below the value of THRESHOLD 1, the operating cycle related to channel
1 starts all the same, however it is limited to numbers 3 and 4 by means of sound tones
instead of voice announcements.
The JP1 jumper must be on the INST position to enter this function.
Note 5:
• to enable this function, choose “Y” by pressing key
• to disable this function, choose “N” by pressing key
The activation of this function prevents function 7 to be entered.
FUNZIONI
FUNZIONI
Programming of FUNCTIONS
Activation of the operating cycle related to
channel 1 for battery voltage lower than
THRESHOLD 1
(see note 5)
Entering FUNCTION 6
Operating cycle related to channel 1 for BAT-
TERY voltage < THRESHOLD 1
M1
M1
BAT
BAT
M1
M1
BAT N Y
BAT N Y
6
✓
✓
✗
*
#
Confirmation of the
programmed number by means of
and exit from the function through
or time-out.
✓
✗
C.415 10-06-2002 9:11 Pagina 39
