- 25 -
G
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pag. 26
Technical features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pag. 26
- Reference standard
Operation description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pag. 27
Front panel description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pag. 28
- Numeric keypad and programming keys
- LCD display
- Microphone and loudspeaker
Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pag. 30
- Programming of NUMBERS
- Programming of FUNCTIONS
Internal view and connection to the mobile telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pag. 46
- Tamper alarm
Wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pag. 48
DIRECTIONS
The products must be sold in their original packing. Where this is not the case, the retailer and/or the
installer must apply and transmit the instructions for use supplied with the product to the user. After
opening the packing, check the product’s ntegrity; in case of doubt, do not use the equipment and con-
sult skilled personnel. Even when wrapped in its packing, the equipment must be handled with care
and stored in a dry room at a temperature between –5 and +40°C.
Remember:
• Before working on the system, turn off the voltage by pressing the main switch.
• To avoid a reduction in the insulation distances between terminals, carefully prepare the cableheads
to be inserted into the terminals of the device.
• In order to avoid overheating which could cause a fire or damage the cables, tighten the terminal
screws carefully.
• If not otherwise indicated, the product must be used in dry rooms free of dust.
Use specific products for special environments.
C.415 10-06-2002 9:11 Pagina 25
