Avaya WLAN 8100 Series, Справочник, Страница: 196 / 382

Configuring MAC address-based security using CLI
About this task
Use the following commands to configure the MAC address security using Media Access
Control (MAC) addresses.
Related topics:
show mac-security command on page 196
show mac-security mac-da-filter command on page 197
mac-security command on page 197
mac-security mac-address-table address command on page 198
show mac-security mac-address-table command on page 199
mac-security security-list command on page 199
no mac-security security-list command on page 199
mac-security command for specific ports on page 199
show mac-security command on page 200
mac-security mac-da-filter command on page 200
CLI commands for MAC address auto-learning on page 201
show mac-security command
The
show mac-security
command displays configuration information for the MAC security
application.
CLI reference:
WCP8180(config)#show mac-security ?
config Display the stack/switch MAC security configuration.
mac-address-table Display the accessible MAC addresses on each port.
mac-da-filter Display MAC DA filtering addresses
port Display ports' MAC security status.
security-lists Display port membership of security lists.
The following table outlines the parameters for this command.
Table 42: show mac-security command parameters
Parameter Description
config Displays general MAC security configuration
information.
mac-address-table [address <madaddr>] Displays contents of BaySecure table of
allowed MAC addresses:
• address—specifies a single MAC address
to display; enter the MAC address
port Displays the BaySecure status of all ports.
ACLI Reference for wired networks
196 Avaya WLAN 8100 CLI Reference August 2013
Comments? infodev@avaya.com