Avaya WLAN 8100 Series, Справочник, Страница: 198 / 382

Parameter Description
intrusion-detect {enable|disable|forever} Specifies partitioning of a port when an
intrusion is detected:
• enable—port is partitioned for a period of
time
• disabled—port is not partitioned on
detection
• forever—port is partitioned until manually
changed
intrustion-timer <1-65535> Specifies, in seconds, length of time a port is
partitioned when an intrusion is detected;
enter the number of seconds desired.
learning-ports <portlist> Specifies MAC address learning. Learned
addresses are added to the table of allowed
MAC addresses. Enter the ports to learn; a
single port, a range of ports, several ranges,
all ports, or no ports can be entered.
learning {enable|disable} Specifies MAC address learning:
• enable—enables learning by ports
• disable—disables learning by ports
snmp-lock {enable|disable} Enables or disables a lock on SNMP write-
access to the BaySecure MIBs.
snmp-trap {enable|disable} Enables or disables trap generation upon
intrusion detection.
mac-security mac-address-table address command
The
mac-security mac-address-table address
command assigns either a specific
port or a security list to the MAC address. This removes the previous assignment to the
specified MAC address and creates an entry in the BaySecure table of allowed MAC
addresses.
The syntax for the
mac-security mac-address-table address
command is
mac-security mac-address-table address <H.H.H.> {port <portlist>|
security-list <1-32>}
The following table outlines the parameters for this command.
Table 44: no mac-security mac-address-table parameters
Parameter Description
<H.H.H> Enter the MAC address in the form of H.H.H.H.H.H
port <portlist> Enter the port number.
ACLI Reference for wired networks
198 Avaya WLAN 8100 CLI Reference August 2013
Comments? infodev@avaya.com