Installing the VSU-7500
2-1
Chapter 2
Installing the VSU-7500
This chapter provides instructions for the following:
•
Installing the Power Supply Modules (page 2-1)
•
Rackmount Installation (page 2-2)
•
Connecting the VSU-7500 to the Network (page 2-4)
Installing the Power Supply Modules
The VSU-7500 power supply modules are shipped outside the unit. To install the
power supply modules, refer to Figure 2-1 and perform the following steps:
1.
Remove the two power supply modules from their shipping containers.
NOTE:
The power supply modules feature autoranging of the source AC line
voltage, thus eliminating the need for a voltage selector switch.
2.
Slide each power supply module into the enclosure and press firmly on the
front of the unit to securely seat the unit. The black spring-loaded retaining
clip should snap when the power supply is locked into place.
3.
Set the ON/OFF (I/O) switch of each power supply module to the ON
position.
Содержание VSU 7500
Страница 1: ...VSU 7500 VPNware Service Unit User Guide VPNet Technologies Inc ...
Страница 19: ...Installing the VSU 7500 2 3 VSU 7500 User Guide Figure 2 2 Installing the Rackmount Brackets ...
Страница 40: ...A 4 Specifications VSU 7500 User Guide ...
Страница 42: ...B 2 10 100BASE T UTP Crossover Cable Pinouts VSU 7500 User Guide ...