Avaya S3210, Руководство пользователя

Страница: 51 / 84

Message Networking Help
Home | Search
Print | Back | Fwd | Close
Getting Started Admin Maintenance Reference
Home > Installation > Installing language packages and switch connection software
Installing language packages and switch connection software
This topic provides information on installing or updating the software required to support:
!
Additional languages
!
The connection between the switch and the Message Networking system
If you perform these procedures after initial system administration, back up the system before proceeding.
Installing additional language software
The language packages, also called announcement sets, allow remote machine subscribers to hear system
announcements in other languages. The system is shipped from the factory with US English installed.
To install or update additional languages:
1. Log in to the system .
2. Insert the Languages CD-ROM in the CD drive.
3. Start at the Administration menu, and select
Utilities
>
Software Management
>
Software Installation
.
4. Click CD .
Note: The system displays a warning if you have not backed up your system. Click Cancel to return to
the Utilities menu and perform a backup, or click
Continue this operation without current system
backup
to proceed without a backup.
The system displays a list of packages available on the CD or any newer versions available for any of the
languages installed on the system.
5. Select the language packages you want to install and then click Install selected packages .
The system displays a list of packages to be installed.
6. When the system displays the list of packages to be installed, review the list and then click
Proceed with
installation .
The system begins the installation and displays installation status messages. The installation is complete
when the pointer changes from a wristwatch to an X.
7. When the pointer changes from a wristwatch to an X, press PageDown and verify that the software was
installed successfully.
8. Remove the CD from the CD drive.
9. Click
Return to main Software Management
menu.
10. Click
Return to Main
to return to the Administration menu.
11. If the system is to be moved or shipped, shut down and power off the system. If system data is to be
administered, continue with Install switch connection software.
Note: There is a possible issue that might be experienced by subscribers on Modular Messaging Release 2
systems using Latin American Spanish. See General Troubleshooting .
Installing switch connection software
Note: You can only have one switch connection software package installed on the system at one time. If one
package is already installed and you want to install a different package, you must remove the first package
before installing the second package.
51