Avaya, Inc. Proprietary
Use Pursuant to Company Instructions
3
8/15/2008
4.3
Programming PARTNER
If dialing a PARTNER extension will access the modem, lines at the modem’s extension
should be changed to No Ring. This is the step-by-step procedure for configuring the No
Ring option for lines at the modem’s extension:
1.
From extension 10 or 11, press
Feature
0 0
.
2.
Press the left
Intercom
twice, and then press the right
Intercom
once.
3.
At the Extension: prompt, enter the modem’s extension number.
The green lights next to the line buttons show the current Line Ringing settings:
Immediate Ring: steady light
Delayed Ring: slow flash
No Ring: quick flutter
4.
Press the line buttons until their button lights are set to No Ring (quick flutter).
5.
Exit programming mode by pressing
Feature
0 0
.
5
Appendices
5.1
DIP Switch Settings
This table description of the US Robotics DIP switch settings:
DIP Switch
Description
1
DTR Override
2
Verbal/Numeric Result Codes
3
Result Code Display
4
Command Mode Local Echo Suppression
5
Auto Answer Suppression
6
CD Override
7
Power-on and ATZ Reset Software Defaults
8
AT Command Set Recognition
ON = Down, OFF = Up.
5.2
Initialization String
The modem initialization string for this configuration has the following definition:
at&f0q1e0s0=3&w
AT command
Description
&f0
Set to Factory Defaults (no Flow Control)
q1
Eliminate result codes