18
SEC
T
I
O
N
Creating a Remote Administration Password
For security purposes, the Remote Administration Password is different from the system
Password. The Remote Administration Password can only be created on the PARTNER
system and must exist before you can connect.
Using a PARTNER display phone:
1
From extension 10 or 11, activate System Programming by pressing
Feature 0 0
2
Press
System Program
3
Press
System Program # 7 3 0
4
Enter a password up to 8 alphanumeric characters in length (there is no default pass-
word). Each character is established by entering two digits. (See the Character Code
Table (5-3) on page 5-131 of the Programming and Use manual for additional details.)
5
To save the password, press the
Enter
key. The display shows “Remote Password”
confirming that the password was saved. (Warning: If you exit without pressing
Enter
, your new password will not be saved.)
For information about the location of special programming buttons on a PARTNER
phone, see the PARTNER system documentation.
3
C o n n e c t i n g t o t h e PA R T N E R A C S S y s t e m
