Line/Field
Description
Associated System Parameter
IKE ID (Group Name)
This field and the next three fields
display only if your VPN meets the
conditions for displaying IKE PSK.
NVIKEID
Pre-Shared Key (PSK)
Pre-Shared Key.
Blank if PSK has no value (null),
otherwise 8 asterisks.
IKE ID type
This field and the next five fields
display only if your VPN meets the
conditions for displaying IKE
Phase 1. Values are: 1 =
ID_IPV4_ADDR 2 = ID_FQDN 3 =
ID_USER_FQDN 9 =
ID_DER_ASN1_DN 11 =
ID_KEY_ID
NVIKEIDTYPE
IKE Xchg Mode
1 = Aggressive Mode 2 = Main
Mode Identity Protection
NVIKEXCHGMODE
IKE Xchg Mode
1 = Aggressive Mode 2 = Main
Mode Identity Protection
NVIKEXCHGMODE
IKE DH Group
1 = First Oakley Group 2 =
Second Oakley Group 5 = 1536-
bit MODP Group 14 = 2048-bit
MODP Group 15 = 3072-bit
MODP Group
NVIKEDHGRP
IKE Encryption Alg
Algorithm 0 = Any 1 = AES-
CBC-128 2 = 3DES-CBC 3 =
DES-CBC 4 = AES-CBC-192 5 =
AES-CBC-256
NVIKEP1ENCALG
IKE Auth. Alg
Authentication algorithm for IKE: 0
= Any 1 = MD5 2 = SHA
NVIKEP1AUTHALG
IKE Config Mode
1 = Use the ISAKMP configuration
method for setting certain
applicable values. 2 = This setting
is turned off (disabled) because a
generic PSK profile is in effect.
NVIKECONFIGMODE
IPsec PFS DH Group
This field and the next four fields
display only if your VPN meets the
conditions for displaying IKE
Phase 2. This field specifies the
Diffie-Hellman Group to be used
for establishing the IPsec SA (also
known as PFS). If this value is not
"0", a new Diffie-Hellman
exchange will be initiated for each
IKE Phase 2 Quick Mode
exchange, where the proposed
DH group will be as specified by
NVPFSDHGRP
Table continues…
VPN settings screen fields
March 2015
VPN Setup Guide for 9600 Series IP Telephones
21