Avaya one-X 1603SW, Руководство администратора, Страница: 105 / 124

Interface Control
Issue 1 June 2010 105
Static Addressing Installation
The usual way to assign IP addresses to IP telephones is the automatic method. There might
be times, however, when manual assignment of IP addresses is desired.
!
CAUTION:
CAUTION:
Static addressing is necessary when a DHCP server is unavailable.
Because of the increased opportunities for text entry errors associated with static
addressing, we very strongly recommend that a DHCP server be installed and
static addressing avoided.
Use the following procedure to invoke manual address information programming.
1. Start manual address programming by performing one of the following steps:
a. During normal DHCP processing, press the * key while “
* to program
“ displays during
the DHCP process.
or
b. While the telephone is on-hook and idle, press the following sequence of keys on the
faceplate of the telephone:
Mute 2 3 3 7 # (Mute A D D R #)
Protocol: cccccccc
filename.ext
cccccccc Etherne t
bootcodename
Up to 8 ASCII characters.
4 to 32 ASCII characters. The name of
the primary ("big app") image file
currently stored in the telephone
(endptAPPINUSE).
2 to 7 ASCII characters, either
“100Mbps”, “10Mbps”, or “No”
depending on the current speed of the
Ethernet line interface.
1 to 32 ASCII characters. The name of
the backup ("little app") image file
currently stored in the telephone
(endptBOOTNAME).
Table 15: Parameter Values (continued)
Name System Value Format
3 of 3