manualshive.com logo in svg

Avaya J100 Series, Установка и администрирование, Страница: 278 / 528

Поделиться
Скачать
Avaya J100 Series Скачать руководство пользователя страница 278

Parameter name

Default value

Recommended settings

REGISTERWAIT

900

This parameter represents
number of seconds between
register refreshes. It is
recommended to set the value to
“120” to “180” seconds.

This enables faster recovery
detection of signaling servers.

Related links

Redundancy in generic Open SIP

 on page 276

Redundancy in a Broadsoft environment

In a Broadsoft environment, SIP controllers are called application servers. The application servers
are deployed as a cluster containing primary and secondary application servers. A cluster is
represented as a domain with data replicated between the application servers. The phones use
DNS to discover the application servers in the cluster. During DNS lookup operations, DNS returns
the sequence of the servers as primary server followed by secondary server.

For more information on the Broadsoft redundancy deployment, see Broadsoft documentation at 

https://xchange.broadsoft.com/

.

Related links

SIP server redundancy

 on page 276

Redundancy parameters - Broadsoft

 on page 278

Redundancy parameters - Broadsoft

To configure the phone for redundant signaling mode in a Broadsoft environment use

46xxsettings.txt

 file to set the following parameters:

Parameter name

Default value

Required settings

SIPREGPROXYPOLICY

simultaneous

This must be set to alternate.

SIP_CONTROLLERS_LIST_2

Null

This parameter should not be set
and left at default.

Open SIP redundancy does not
support IPv6.

3PCC_SERVER_MODE

0

This parameter should be set to
“1”.

Table continues…

SIP server redundancy configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

278

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов