Avaya IP Office Essential Edition PARTNER Version, Быстрое руководство по установке, Страница: 8 / 28

PARTNER Version Quick Installation Guide Page 8
- Issue 1b (09 April 2010) IP Office Essential Edition
1.1 System Components
The following are the components of an IP Office Essential Edition - PARTNER® Version system covered by this quick
installation guide.
·
IP Office IP500 V2 Control Unit
The control unit holds the main configuration and performs the
routing and switching for telephone calls and data traffic. The
control unit includes 4 slots for optional base cards to support
trunk and phone extension ports.
·
Avaya System SD Card
This card is used to hold system files and provide voicemail.
The card has a unique serial number which is is used to
validate license keys entered into the system's configuration.
The card is mandatory for correct system operation.
·
The control unit is not supplied with a power cord. An
IEC60320 C13 type earthed power cord is required.
·
IP500 Base Cards
The IP500 control unit has slots for up to 4 IP500 base cards.
These can be used to add analog extension port, digital extension
ports, voice compression channels and some legacy IP400 cards.
·
IP500 Digital Station 8 Base Card (Maximum 3)
Each card supports up to 8 1400 series phones.
·
IP500 Analog Phone 8/Phone 2 Base Cards (Maximum 4)
Each card supports 8 or 2 analog phones.
·
IP500 ETR6 Base Card (Maximum 3)
Each card supports up to 6 ETR phones (only 2 ETR34 or
ETR34D phones).
·
IP500 Trunk Daughter Cards
The IP500 base cards can be fitted with an IP500 trunk daughter
card in order to support trunk connections.
· IP500 Analog Trunk Card (Maximum 4)
This card provides 4 analog trunk connections.
· IP500 PRI Trunk Card (Maximum 1)
This card provides a single PRI/T1 trunk connection.
·
IP500 ATM Combination Cards (Maximum 2)
This card is a pre-paired base and daughter card. It provides 6
digital station ports, 2 analog phone ports, 10 VCM channels and 4
analog trunk ports. The trunk daughter card cannot be removed or
replaced with another type.
·
Cables
The IP Office is designed primarily for connection to a structured
cabling system using CAT3 UTP cabling. This approach allows
telephone and data traffic to share the same wiring infrastructure
and simplifies equipment moves.
·
Wall Mounting Kit
The control unit can be used free-standing, with an external
expansion modules stacked above it. Alternatively the control unit
can be wall mounted though no external expansion module is
supported when wall monuted.
·
Phones
The following phones are supported on IP Office Essential Edition -
PARTNER® Version systems:
· ACS "Refreshed" Series: ETR6D, ETR18D, ETR34D, 3910
and 3920.
· ACS "Euro" Series: ETR6, ETR18, ETR18D, ETR34D.
·
1400 Series: 1403, 1403SW, 1408, 1416.
·
Analog Phones
12