Avaya IP Office 4602, Руководство администратора

Страница: 28 / 50

Managing the Telephone Manually or Using the Web Interface
28 4602 SIP Telephone SIP Release 1.2 Administrator’s Guide
Determining the IP Address
To verify the IP address currently assigned to the telephone, follow this procedure:
1. With the phone idle, press Mute and enter I N F O # using the dialpad.
The phone displays
Info View
and
*=End #=Next
2. Press #.
The phone displays
IP address DHCP
or
IP address Static
and the numeric IP
address.
3. To exit the INFO mode and return the phone to normal operation, press *.
Using the Telephone Dialpad to Set the IP Address
To manually set the telephone’s IP address, follow these steps:
1. Plug in the phone and watch for the prompt
Press * for Setup
.
2. When the prompt displays, press the * key.
The phone displays
Clear All Values
and
*=No #=Yes
.
3. Press *
The phone displays
DHCP=On/Off
and
*=Toggle #=OK *=
.
4. Press * until
DHCP=Off
displays.
5. Press #.
The phone displays
IP Addr=?
and
Speaker=? #=OK *=
.
6. Use the dialpad to enter the IP address, then press #. (If applicable, press
the Speaker button to backspace.)
The phone displays
Mask=?
and
Speaker=<- #=OK *=
.
7. Enter the SubNet Mask, then press #.
The phone displays
Gateway=?
and
Speaker=? #=OK *=
.
8. Enter either the Router address or Gateway address, then press #.
9. You may optionally specify other parameters, when prompted. Or, if you plan to complete
programming from the Web interface, press # in response to all other prompts.
The phone displays
Saving Values
and then
Starting
. The telephone then reboots
using the values entered.