Key Clicks, Out of Range & Vibrator - Page 9
Key Clicks, Out of Range & Vibrator
Key Click Sounds
You can set if the handset keys should give a click when pressed.
1.
Press
MENU
and
PROFILE SET UP
appears. Press
and select the
required Profile (1 or 2) then press again.
2.
Press
>
until
KEY CLICK
appears, then press .
3.
Use
<
and
>
to either switch
OFF
or to increase the volume.
Press to save the setting.
4.
Press
MENU
to finish.
Out of Range Tone
An out-of-range warning tone occurs when you are about to go out-of-range
of the current base station and either there is no base station to handover
the call to or the next base station already has its maximum number of
calls.
1. Press
MENU
and
PROFILE SET UP
appears. Press
and select the
required Profile (1 or 2) then press again.
2. Press
>
until
OUT of RANGE
appears and then press .
Use
<
and
>
to switch
ON
or
OFF
.
3. Press
to save the setting.
4. Press
MENU
to finish.
It is strongly recommended that the
OUT of RANGE
option is always
ON
.
Vibrator
You can set the handset to vibrate and ring or just vibrate or just ring (see
page 7) when an incoming call arrives (not available when twinned with a
desk top phone).
1. Press
MENU
and
PROFILE SET UP
appears. Press
and select the
required Profile (1 or 2) then press again.
2. Press
>
until
VIBRATOR
appears, then press .
3. Use
<
and
>
to either switch
ON
or
OFF.
4. Press to save the setting.
5. Press
MENU
to finish.
IP Office - 20DT Handset User's Guide
Key Click Sounds - Page 9
40DHB0002UKCH Issue 3 (25/09/2002)
