Avaya IP Office 1400 Series, Руководство пользователя

Страница: 40 / 78

IP Office Basic Edition 1400 Series Phone User Guide Page 40
- Issue 7a (30 January 2014) IP Office Basic Edition
3.6 Do Not Disturb
Use this feature to be able to press a programmed button to prevent incoming calls for the extension from ringing (lights
may still flash). You can still use the extension to make calls and to answer calls using line appearance buttons.
· Use Do Not Disturb when you do not want the auto attendant or the voice messaging system to transfer calls to
you.
· If you are assigned to a hunt group and you leave your desk, use Do Not Disturb so that calls to the hunt group
will skip your extension and ring immediately at the next available extension in the group.
·
Unanswered calls that are transferred from an extension with Do Not Disturb active, ring at that extension if they
transfer return.
·
If you have VMS Cover turned on, enabling Do Not Disturb will send all your calls immediately to your
voicemail mailbox.
·
If you have Call Coverage turned on, enabling Do Not Disturb will send all your calls immediately to the
covering extension.
·
The status letter N is shown on your phone's idle display when you have Do Not Disturb enabled. If you go
off-hook, you will hear interrupted dial tone.
To manually switch do not disturb on/off: (1403/1408/1416)
1. Dial FEATURE 01. On 1043 phones dial *01 and press DROP. An N is shown on your phone's idle display when
you have do not disturb enabled.
To create a do not disturb button: (1408/1416)
When Do Not Disturb feature is on, the button's light is lit.
1. Press the Admin soft key on the display.
·
If you access phone administration during a call, only the SPEAKER, MUTE and HEADSET buttons
still affect the connected call.
2. Use the up or down arrow buttons to scroll to Telephone Programming. Press Select.
3. Press the programmable button you want to change. Alternatively:
·
Use the up or down arrows to scroll to Button Programming. Press Select.
·
At the Button: prompt press the button to edit or enter from the button number.
4. The current setting of that button is displayed.
5. Press Program and either dial #01 or use the up or down arrow buttons to scroll the display to Do Not
Disturb and press Select.
6. The current setting of the button will now be set to Do Not Disturb.
·
Exit phone administration by pressing the PHONE button. Alternatively use the Back button to move to
another menu.
45
36
15