Avaya G450 Manager, Справочное руководство CLI

Страница: 1275 / 1334

VRRP
Issue 1 January 2008 1275
ip vrrp primary
Use the
ip vrrp primary
command to set the primary address that is used as the source
address of VRRP packets for the virtual router ID. Use the
no
form of this command to restore
the default primary address for the virtual router instance. By default, the primary address is
selected automatically by the device.
Syntax
[no] ip vrrp vr_id primary ip_address
Parameters
User Level
read-write
Context
interface:FastEthernet (L2-L3, L2), VLAN (L2-L3, L2)
Example
To specify the source IP address for virtual router 1 as 192.168.66.23:
G450-001(if:Vlan 2)# ip vrrp 1 primary 192.168.66.23
Related Commands
ip vrrp , ip vrrp address , ip vrrp auth-key , ip vrrp override addr owner , ip vrrp preempt , ip vrrp
priority , ip vrrp timer , router vrrp , show ip vrrp
Parameter Description Possible
Values Default
Value
vr_id
The virtual router ID 1-255
ip_address
The primary IP address of the virtual router.
This address should be one of the router
addresses on the fabric.