Avaya G450 Manager, Справочное руководство CLI

Страница: 1273 / 1334

VRRP
Issue 1 January 2008 1273
User Level
read-write
Context
interface:FastEthernet (L2-L3, L2), VLAN (L2-L3, L2)
Example
To specify the password authentication for virtual router 1 as “sec01”:
G450-001(if:Vlan 2)# ip vrrp 1 auth-key sec01
Related Commands
ip vrrp , ip vrrp address , ip vrrp override addr owner , ip vrrp preempt , ip vrrp primary , ip vrrp
priority , ip vrrp timer , router vrrp , show ip vrrp
ip vrrp override addr owner
Use the
ip vrrp override addr owner
command to accept packets addressed to the IP
address associated with the virtual router, such as ICMP, SNMP, and Telnet (if it is not the IP
address owner and it is the master). Use the
no
form of this command to discard these packets.
Syntax
[no] ip vrrp vr_id override addr owner
Parameters
User Level
read-write
Context
interface:FastEthernet (L2-L3, L2), VLAN (L2-L3, L2)
Example
To specify that virtual router 1 accepts ICMP, SNMP, and Telnet packets:
G450-001(if:Vlan 2)# ip vrrp 1 override addr owner
Parameter Description Possible
Values Default
Value
vr_id
The virtual router ID 1-255