Parameter
Description
Operating temperature
– 5 to 85C for RoHS -E6 models
0 to 60C for RoHS -E5 models
Storage temperature
– 40 to 85C
Maximum supply current
300 mA unless otherwise stated
Maximum power consumption
1.0 W unless otherwise stated
SFPs
The following sections provide specifications for supported SFPs.
1000BASE-T SFP specifications
The 1000BASE-T SFP provides gigabit Ethernet connectivity using a single eight-pin RJ-45
connector. The 1000BASE-T SFP only operates at 1 Gb/s and does not support 100BASE-T
or 10BASE-T interfaces. The part number for this model is AA1419043-E6.
Important:
You must disable autonegotiation before you operate the 1000BASE-T SFP. After you insert
SFPs into certain product-specific modules, the system activates autonegotiation by
default.
The maximum current requirement of the SFP is 375 milliamperes (mA) at 5 volts (V).
The following table describes the 1000BASE-T SFP specifications.
Table 2: IEEE 802.3z 1000BASE-T SFP specifications
Parameter
Specifications
Standards
IEEE 802.3z, IEEE 802.3ab
Connectors
RJ-45
Cabling
CAT5E or better UTP
Distance
Up to 100 m
100BASE-FX SFP specifications
The 100BASE-FX SFP provides 100 Mbit/s Ethernet Carrier Sense Multiple Access with
Collision Detection (CSMA-CD) connectivity using multimode optical fiber. The 100BaseFX
uses an LED transmitter. The centre wavelength, spectral width, and optical rise/fall time satisfy
the trade-off curves in the FDDI PMD document (ISO/IEC 9314–3:1900). The supported link
length is up to 2 km over MMF. The part number for this model is AA1419074–E6.
The following table describes the 100BASE-FX SFP specifications.
SFP specifications
26 Installing the SFP, SFP+, and XFP transceivers on Avaya ERS 3500 Series
March 2014
