Avaya CallPilot 1006r, Установка оборудования, Страница: 31 / 46

Follow the installation procedures in this document for each server, with the following
exceptions:
• Do not connect the server to the Avaya Server Subnet, or the ELAN subnet until directed to
do so in the Server and Switch Configuration guide.
• The two servers are delivered with only one dongle. It does not matter which server you
connect the dongle to until you configure the servers.
For more information about the High Availability feature, see High Availability: Installation and
Configuration (NN44200-311).
Inspecting the modem
Introduction
You require a modem to support remote dial-up access to the CallPilot server. Avaya technical
support also connects to your CallPilot server for troubleshooting purposes. Avaya connects
to your server only when you request technical assistance.
Required equipment
To install the modem, you need the following equipment:
• USB modem
• RJ-11 analog phone cord
• USB cable (supplied with the modem)
• analog line jack
Serial port modems with RS-232 connections are not supported on the 1006r.
What is next?
Continue with Connecting peripherals to the server on page 32.
Inspecting the modem
Avaya CallPilot® 1006r Server Hardware Installation December 2010 31