8
If this telephone equipment causes harm to the telephone network, the telephone company will
notify you in advance that temporary discontinuance of service may be required. But if advance
notice isn’t practical, the telephone company will notify the customer as soon as possible. Also,
you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or proce-
dures that could affect the proper functioning of your equipment. If they do, you will be notified
in advance in order for you to make necessary modifications to maintain uninterrupted service.
If trouble is experienced with this unit, for repair or warranty information, please contact
customer service at (800) 544-4660. If the equipment is causing harm to the network, the tele-
phone company may request that you disconnect the equipment until the problem is resolved.
DO NOT DISASSEMBLE THIS EQUIPMENT: it does not contain any user serviceable compo-
nents.
We recommend the installation of an AC surge arrester in the AC outlet to which this equip-
ment is connected. Telephone companies report that electrical surges, typically lighting tran-
sients, are very destructive to customer terminal equipment connected to AC power sources.
industrY CAnAdA nOtiCe
nOTiCe:
This equipment meets the applicable Industry Canada Terminal Equipment Techni-
cal Specifications. This is confirmed by the registration number. The abbreviation, IC, before
the registration number signifies that registration was performed based on a Declaration of
Conformity indicating that Industry Canada technical specifications were met. It does not imply
that Industry Canada approved the equipment. The Industry Canada registration number is
located in the bottom of the unit. Before installing this equipment, users should ensure that it
is permissible to be connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection. The customer
should be aware that compliance with the above conditions may not prevent degradation of
service in some situations. Repairs to certified equipment should be coordinated by a repre-
sentative designated by the supplier. Any repairs or alterations made by user to this equipment,
or equipment malfunctions, may give the telecommunications company cause to request the
user disconnect the equipment. Users should ensure for their own protection that the electri-
cal ground connections of the power utility, telephone lines and internal metallic water pipe
system, if present, are connected together. This precaution may be particularly important in
rural areas.
Caution: Users should not attempt to make such connection themselves, but should contact
the appropriate electric inspection authority, or electrician, as appropriate.
RSS 210
This digital apparatus does not exceed the Class B limit for radio noise emissions from digital
apparatus set out in the Radio Interference Regulations of Industry Canada. Operation is
subject to the following two conditions:
1) this device may not cause interference, and 2) this device must accept any interference,
including interference that may cause undesired operation of the device.
ACCessing tHe AvAYA uniFied COM-
MuniCAtiOn Center (uCC) FrOM tHe
AwH54/AwH55+
1. Connect the AWH54/AWH55+ to the Avaya telephone. Follow the instructions in this
user’s guide.
2. Ask your switch administrator to configure your telephone for
ringdown to the UCC in your telephone first call appearance.*
* Notes for switch administrators on configuring ringdown for your AVAYA telephones:
• Some phones allow for direct ringdown configuration, i.e.: 2500
• Other phones do not allow for direct ringdown configurations, i.e.: 64XX. In order to
configure the ringdown in these phones the administrator needs to:
• Create a phantom extension setup as a 2500 type (No real port has to be assigned).
• Create a ring down to the UCC for the phantom extension.
• Bridge the phantom extension to the telephone call appearance 1 (configure it as an
“abrdg-appr” and setup the “Auto Select Any Idle Appearance” to Yes).
The Avaya Headset Support line is ready to assist you!
Dial (800) 544-4 Monday through friday, 5a.m. to 5p.m.
pacific Time. for accessibility information also call the Avaya
Headset Support line.