Alarm with location information
Information about the handset’s location can be sent along with an alarm. The location can be
added as follows:
• Manually added by the user
• An approximately location given by the closest Base Station.
Alarm with data
The data must manually be defined and stored by the user. To use the function, one Soft or Hot
key or Navigation key in the handset must be defined as a shortcut to the menu
Edit alarm data
.
The stored data is added to all types of alarm at transmission.
Automatic call after alarm
A handset can be configured to call a predefined number after an alarm has been sent. If
configured, it is also possible to call the predefined number without sending an alarm by pressing
the push-button. Depending on the settings, the call can be established in the following modes:
• Loudspeaking mode
• Normal mode
• Monitor mode
Procedure call
About this task
When configuring the functions
Call services
,
In call
menu,
Contacts
, or a shortcut or service to
the
Phone call
function, the data added in these functions is static. When entering the data for the
function to be used, it is possible to add a variable or character U that allows the user to enter
additional numerical characters before calling the number or sending the data to a system.
Example of configuration:
A user wants to create a service with the Phone call function. The PBX requires that a prefix must
be added to a phone number. In this case, the user can pre-program the prefix and then enter the
applicable phone number when using the Phone call function.
Procedure
1. Press
Menu
, or the confirmation button.
2. Select
My favorites
.
3. Select
Add new
.
Managing profiles
August 2019
Using 3735 DECT handsets with Communication Manager and IP Office
99
