5. RS232:
Connect the RS232 port to the PC or notebook by RS232 Cable.
6. DC 12V:
Plug the 12V DC power supply into the unit and connect the adaptor to
AC wall outlet.
5.3 Rear panel (Extender Version)
1.
Input:
These slot is where you connect the HDMI source output from DVD,
PS3,Set-top Box and Note Book.
2.
OUTPUT:
The HDMI is where you connect the HDTV or monitor with HDMI
cable for input source display.
The UTP port connect to CAT Receiver by CAT5e/6
cable for signal extend.
The Coax is where you connect to the amplifier with
coaxial cable.
3.
IR RX:
Connect to the IR Receiver for IR signal reception. Ensure that remote
being used is within the direct line-of-sight of the IR receiver.
4.
IR TX:
Connect the IR Blaster cable included in the package for IR signal
transmission. Pace the IR blaster in direct line-of-sight of the equipment to be
controlled.
5.
RS232:
Connect the RS232 port to the PC or notebook by RS232 Cable.
6.
DC 12V:
Plug the 12V DC power supply into the unit and connect the adaptor to
AC wall outlet.
5.4 CAT Receiver(Extender Version)
1
DC 5V:
Connect from 5V DC power supply into the unit and connect the adaptor
to an AC outlet.
2
IR RX:
Connect to the IR Receiver for IR signal reception. Ensure that remote
being used is within the direct line-of-sight of the IR receiver.
3
IR TX:
Connect the IR Blaster cable included in the package for IR signal
transmission. Pace the IR blaster in direct line-of-sight of the equipment to be
controlled.
Содержание VS-441S
Страница 9: ...Basic version Extender version...
