Avari Fitness Avari, Руководство пользователя

Страница: 12 / 27

Transmission LED Indicator
For checking operation of transmitter, the red LED indicator will flash indicating the transmitter is in operation.
Adjust the transmitter position to keep the LED indicator flashing consistently for accurate readings. (See
illustration below.)
12
NOTE: If your heart rate is inconsistent or not tracking on your workout console, do the following:
Moisten the hexagonal rubber areas covering the electrodes on the back of the chest strap and
make sure they are in contact with the skin. Your skin may be dry when you begin your workout
and the moisture is necessary to ensure contact. As you sweat, contact will improve.
Tighten the elastic strap so it remains in place as you exercise. Movement of the electrodes will
result in inaccurate or erratic signal and readings.
Clean the electrodes as dirt can interfere with transmission. Use a mild soap and water and dry
with a soft towel.
Wash regularly with mild soap and water solution and dry with a soft towel being careful not to abrade
the electrodes.
Store in a cool, dry place. Make sure the electrodes aren ’ t stored with any wet material and never store
a wet transmitter in non-breathable material like a plastic bag or sports bag.
Do not bend or stretch the transmitter.
Transmitter Care and Maintenance
LED Indicator
OPERATIONAL INSTRUCTIONS
NOTE: The frequency of the receiver built into the AVARI® Programmable Magnetic Rower is 5 kHz.
All compatible heart rate transmitters from other companies are allowed for use with the AVARI®
Programmable Magnetic Rower.