ASSEMBLY INSTRUCTIONS
8
STEP 2
Turn the
Center Beam Assembly
to the normal upright position.
Insert the Bracket on
FRONT STABILIZER(2)
into the
FRONT SUPPORT(29)
and secure with
BUTTON HEAD BOLTS(M8x1.25x15mm)(14)
and
WASHERS(M8)(16).
Do not tighten the bolts until Step 4.
STEP 3
NOTE:
During this step it is important that you hold the
HANDLEBAR(9)
while you are cutting the Cable
Tie. For packing, a section of the
ROPE(51)
that is attached to the
HANDLEBAR(9)
is pulled out
of the
UPRIGHT(3).
The
ROPE(51)
has a spring force that will snap the
HANDLEBAR(9)
to the
UPRIGHT(3)
after cutting off the Cable Tie.
Hold the
HANDLEBAR(9)
and cut off the Cable Tie which ties the
HANDLEBAR(9)
to the
UPRIGHT(3).
Swing the
UPRIGHT(3)
up and place the
HANDLEBAR(9)
on the
HANDLEBAR HOLDER(50).
STEP 4
Attach the
UPRIGHT(3)
to the
FRONT STABILIZER(2)
with
BUTTON HEAD BOLTS(M8x1.25x15mm)
(14)
and
WASHERS(M8)(16).
Tighten all the bolts from Step 2.
Cable Tie
Содержание AVARI Easy Glide Rower
Страница 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK...
Страница 21: ...NOTES 21...
