SET UP INSTRUCTIONS
12
Equipment Mat
Grasp here
Grasp here
FUNCTION INSPECTION:
Visually inspect the
AVARI® Magnetic Elliptical
to verify that assembly is as shown in the above illustration.
Check the function of the
AVARI® Magnetic Elliptical,
stand on the
PEDAL CAPS(30, 31)
and place your
hands at a comfortable position on the
HANDLEBARS(3, 5).
Slowly move the crank through one complete
revolution to verify that the drive train functions properly. Adjust the
TENSION KNOB(8)
and verify that it
functions properly and the resistance changes.
CAUTION:
Locate and read the
WARNING LABEL(78)
on the
AVARI® Magnetic Elliptical.
Make sure
that all users read the
WARNING LABEL(78)
before using the product.
LEVELING:
Adjust the
LEVELING CAPS(18)
on the
REAR STABILIZER(77)
so the
AVARI® Magnetic
Elliptical
sits on the floor without rocking. Remove and reposition the
LEVELING CAPS(18)
on the
REAR STABILIZER(77)
to level the
AVARI® Magnetic Elliptical.
MOVING:
The
AVARI® Magnetic Elliptical
must be lifted to be moved. Two people are required to
grasp the Pivoting Shaft area and the
REAR STABILIZER(77),
lift and move.
Place the
AVARI® Magnetic Elliptical
in the area where it will be used. It is recommended that the
AVARI®
Magnetic Elliptical
be placed on an equipment mat. The maximum operation dimensions of the
AVARI®
Magnetic Elliptical
are approximately 46.9 inches long x 22 inches wide x 59.1 inches tall. (These dimensions
may vary up to one inch.) Make sure that adequate space is available for access to move around and
emergency dismount from the
AVARI® Magnetic Elliptical.
A minimum of 20 inches on at least one side
and 20 inches either behind or in front of the
AVARI® Magnetic Elliptical
is required for safe operation.
Содержание A550-090
Страница 18: ...PRODUCT PARTS DRAWING BACK FRONT 18...
Страница 22: ...NOTES 22...
