The Avantree Oasis Plus is a long range Bluetooth transmitter or receiver. Class 1 Bluetooth technology and an
optimized antenna design allow it to work at ranges of up to 164ft/50M. Use the Oasis Plus as your home
entertainment audio hub! As a Bluetooth transmitter to Bluetooth-enable your TV or AV receiver, to stream
audio to your Bluetooth headphones or speakers. As a Bluetooth receiver to Bluetooth-enable your traditional
non-wireless music system. It supports both wireless (Bluetooth) and wired (bypass) modes simultaneously.
Watch TV and independently control volume for a pair of Bluetooth headphones and a wired/connected
speaker at the same time. It supports the aptX-HD standard - when used with aptX-HD Bluetooth headphones,
for wireless streaming of high definition, natural sounding audio.
Package Contents
• Avantree Oasis Plus (BTTC-500P)
• Micro USB cable
• Optical cable
• 3.5mm audio cable
• 3.5mm female to RCA male cable
• User manual
Product Overview & Controls
Function & Operation:
1- aptX-LL supported devices: Avantree Audition Pro
，
Torpedo Plus, Plantronics Backbeat Pro etc.
2- aptX-HD supported devices: Avantree AH6, Audio-Technica ATH-DSR9BT, LG G5, etc.
For full list of suppprted devices please visit www.aptx.com
- More status indicator, please refer to support.avantree.com search ‘Oasis Plus LED status’
5
2. Set up your TV
1) Check your TVs output options before the set up
2) TVs with OPTICAL audio out
Now you should be able to use the headphone. IF there’s no sound:
a. Ensure 3.5mm audio input jack should be free.
b. Ensure your TV speaker is set to “External Speaker”
c. Ensure TV Audio Format is set to “PCM” or “DOLBY/DTS” is off (This is
IMPORTANT
)
DC IN
AUX
AUX
OPTICAL
OPTICAL
RX Output
TX Input
Oasis Plus
Optical audio cable
Micro USB power cable
3.1
3.2
3.4
N/A
3.3
Optical
OUT
RCA jacks
labeled
"AUDIO OUT"
L
R
AUX/3.5mm
Please refer
to Point:
Natively
Supported?
Jack
Options
Output options
Other RCA
jacks (usually
audio IN)
Big Phone
Jack
Set TV Speakers to "External Speaker"
Set TV Audio Format to "PCM"(
IMPORTANT
)
