Pair and Connect two Devices Simultaneously (Dual-link)
The Avantree Oasis Plus is a long range Bluetooth transmitter or receiver. Class 1 Bluetooth technology and an
optimized antenna design allow it to work at ranges of up to 164ft/50M. Use the Oasis Plus as your home
entertainment audio hub! As a Bluetooth transmitter to Bluetooth-enable your TV or AV receiver, to stream
audio to your Bluetooth headphones or speakers. As a Bluetooth receiver to Bluetooth-enable your traditional
non-wireless music system. It supports both wireless (Bluetooth) and wired (bypass) modes simultaneously.
Watch TV and independently control volume for a pair of Bluetooth headphones and a wired/connected
speaker at the same time. It supports the aptX-HD standard - when used with aptX-HD Bluetooth headphones,
for wireless streaming of high definition, natural sounding audio.
Package Contents
• Avantree Oasis Plus (BTTC-500P)
• Micro USB cable
• Optical cable
• 3.5mm audio cable
• 3.5mm female to RCA male cable
• User manual
Product Overview & Controls
Function & Operation:
1- aptX-LL supported devices: Avantree Audition Pro
，
Torpedo Plus, Plantronics Backbeat Pro etc.
2- aptX-HD supported devices: Avantree AH6, Audio-Technica ATH-DSR9BT, LG G5, etc.
For full list of suppprted devices please visit www.aptx.com
- More status indicator, please refer to support.avantree.com search ‘Oasis Plus LED status’
10
In TX mode
1) Pair with the first device by following instructions in the “Use as a Transmitter (TX mode)” section.
2) Then pair with the second device:
• Enter second headphones/speaker into pairing mode (refer to user manual).
• Enter the Oasis Plus into pairing mode again; press the button for 2 seconds - “TX” flashes alternating
GREEN
and WHITE.
• Wait for devices to connect. When connected to two devices both LEDs A and B will be on.
Notes:
1) For improved compatibility and sound quality, we suggest you use Bluetooth devices with CSR chipsets,
e.g. Avantree Torpedo plus, Audition Pro, Plantronics backbeat pro, etc.
2) When in dual-link mode, the Oasis Plus doesn’t support aptX-HD.
In RX mode
1) Pair with the first device by following instructions in the “Use as a Receiver (RX mode)” section.
2) Then pair with the second device:
• Enter the Oasis Plus into pairing mode again; press the button for 2 seconds - “RX” flashes alternating
GREEN
and WHITE.
• Activate Bluetooth on your second device and search for “Avantree Oasis Plus“ - tap to connect.
• Wait for devices to connect. When connected to two devices both LEDs A and B will be on.
Note:
Only one device can play music at a time. You must stop the music on one device to play on the other.
