Avantree BTTC-418 Скачать руководство пользователя страница 9

Страница: 9 / 9

Short work range of headphone

- Work range is decided by devices on BOTH ends. Please test the

work range of headphone is ok

- test it with your smart phone.

Source issue

- When you play an internet source from PC, Mac or cellphone, quite often, the audio

cuts are Internet bandwidth / speed related. Please test with local source Bluetooth streaming and

check again.

3. Audio delay

Bluetooth headphone is NOT aptX LL supported - If your Bluetooth headphone does not support

aptX LL, it will work with the Audikast using SBC codec with 220ms latency, you will experience a

noticeable lag between sound and picture.

4. Reconnect

NO need to re-pair the Audikast and headphones for each use, the Audikast will ALWAYS auto

reconnect to the last paired device once you power on both devices and wait for 5-10 seconds .

Otherwise, turn OFF both the Audikast and headphone, then turn them both back ON and wait 5-10

seconds for them to reconnect.

For the 2nd headphone, it will also auto reconnect to the Audikast after waiting 5-10s once power

on. Otherwise, you will need to turn OFF and ON both transmitter and 2nd headphone again, or click

once on 2nd headphones.

More FAQs at:

https://support.avantree.com/hc/en-us/sections/360000234843-Audikast-BTTC-418-BLK-

Содержание BTTC-418









