USER GUIDE
ZERO AND TARE FUNCTIONS
To weigh different items consecutively without removing each item from the scale,
use the Zero and Tare Functions.
NOTE:
will be displayed on the top left
Tare Function is in use and the Tare indicator
corner of the LCD display.
- When Tare Function mode is activated – when pressing the ZERO button between
- If the total weight of loads being measured is below 4% of the scale’s capacity (less
than 200g) the Zero Function is in use and the Zero indicator will be displayed in
the bottom left corner of the LCD display.
- If the total weight of the loads exceeds 4% scales capacity (more than 200g) the
loads, the LCD display will show the total weight of all loads on the scale. Press
ZERO button again to reset the LCD reading to ‘0’ and continue with the next load.
1. Place a bowl on the scale platform.
2. Press the ON/OFF button to switch on the scale.
3. Weighing can commence when the LCD Display shows ‘0’.
4. Place the first load within the bowl to take a reading and the LCD Display will show
the weight of the load.
5. Without removing the load, press the ZERO button to reset the display to ‘0’.
6. With the first load still in place, add the next load. The display will now show the
weight of the newly added load.
7. Repeat this step until all items have been added.
AUTO SHUT OFF
Auto Shut off occurs if display shows ‘0’ or the same weight reading for 1 minute.
NOTE:
This scale does not have a manual Turn Off Function.
