USER GUIDE
1.
2.
3.
SET UP
INSTALL OR REPLACE BATTERIES
Avanti
®
recommends high quality batteries for the best
product performance. Rechargeable batteries are not
recommended.
When new and used for the first time – remove the isolation
sheet under the battery by gently pulling it out.
Remove the battery compartment cover by pushing on the
lever in the direction indicated by arrow.
To remove battery, gently push battery inwards and it will
pop out (use a tool if necessary).
Install 1 x 3V CR2032 lithium battery with positive plate on
top by sliding in beneath the baffle and pressing down on
the opposite side.
4. Re install battery compartment cover.
WARNING
This item requires button batteries to operate. Batteries can cause a choking hazard.
ALWAYS KEEP OUT OF REACH OF CHILDREN.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY
SAFE WAY AND IN ACCORDANCE WITH LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY
Clean the battery contacts and those of the device prior to battery installation.
Remove batteries from equipment which is not to be used for an extended period.
Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead
batteries from the device. Dispose of used batteries properly. Only batteries of the
same or equivalent type as recommended are to be used. DO NOT incinerate used
batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO
NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use
rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT
short-circuit the supply terminals.
